Refine by
Industries served
- Oil, Gas & Refineries
- Water and Wastewater
- Food and Beverage
- Monitoring and Testing
- Environmental
- Pulp & Paper
- Manufacturing, Other
- Agriculture
- Electronics and Computers
- Plastics & Resins
- University / Academia / Research
- Energy
- Mining
- Chemical & Pharmaceuticals
- Construction & Construction Materials
- Automobile & Ground Transport
- Defense
- Medical / Health Care
- Metal
- Waste and Recycling
- Textile
- Air and Climate
- Commercial
Xprt Product Applications In Trinidad
116 applications found
Premium
Solar Turbines provides energy solutions with our gas turbines for power generation, and has extensive experience in the food and beverage industry. Our cogeneration products will increase reliability, efficiency and uptime, avoiding production downtime for your brewery, distillery or food processing plant. With the purchase of our products, Solar offers lifecycle support with one of our Long-Term Service ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Our power generation products are installed in a wide variety of facilities, including colleges and universities, hospitals, government facilities, and rural or electric cooperatives. Our gas turbine generator packages can achieve overall thermal efficiencies of 80% or more in CHP or combined-cycle configurations, where the heat from the turbine exhaust is recovered to produce steam, preheated combustion air, or hot air for heating or ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
The pulp and paper industry requires large amounts of power and heat in forms of hot air and steam. Solar’s best pulp and paper energy solutions use gas turbine-based cogeneration, better known as Combined Heat and Power (CHP). Cogeneration and CHP installations can reduce our customers’ carbon footprint and reduce energy consumption in pulp and paper ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
“A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water- activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. In soil, biological decomposition ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Higher reliability. Increased efficiency. Reduced costs. Solar offers power solutions that meet the needs of commercial industries. Some of our commercial industry clients saved so much that they were able to pay back the entire initial investment of their new Solar solution after just a few years. More than 1500 Solar customers have turned to Combined Heat and Power (CHP) / Cogeneration in order to save money and reduce their carbon footprint. Not only are these commercial customers cutting their plant ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
The ceramic industry demands enormous amounts of energy for the drying processes of various material, including clay, glass, brick, tiles and fixtures. The best way to improve the efficiency of ceramic manufacturing is to connect a gas turbine to the spray dryer, providing heat along with electrical power for the ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Why are utilities turning to Combined Heat and Power (CHP) / ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
LNI Swissgas provides a large range of innovative gas generators for Microwave Plasma-Atomic Emission Spectrometer (MP-AES) ...
ByLNI Swissgas based in Torreglia (PD), ITALY
Premium
Our generators continually protect optics, crystals and coatings of the laser beam path against particles, humidity, hydrocarbons and aggressive gases. Degradation and maintenance are reduced to a minimum. Lifetime and performance of the laser and optical systems are ...
ByLNI Swissgas based in Torreglia (PD), ITALY
Premium
The specialists words are “measuring is good but measuring right is better”. At the moment the thought of an homologation happen for a new or existing engine development, the precision of gas measures is a crucial point. CO2 taxes and regulations oblige power plants and incinarators owners to regulary measure and calibrate the emissions of their installations. In order to fulfill the various normalisations, the Sonimix gas mixers are the essential tools. They provide the precision, reliability and ...
ByLNI Swissgas based in Torreglia (PD), ITALY
Premium
LNI Swissgas provides a large range of gas generators for Total Organic Carbon Analyzer ...
ByLNI Swissgas based in Torreglia (PD), ITALY
Premium
Check our LNI Swissgas range of gas generators for Sample Evaporation ...
ByLNI Swissgas based in Torreglia (PD), ITALY
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)